 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| S/GRA/SW5xxxxx/A/31/03/2004 VARIATEUR MONOPHASE A COMMANDE PROPORTIONNELLE 0 - 10V / ONE PHASE CONTROLLER WITH PROPORTIONAL CONTROL 0 - 10V page 1 /3 F/GB SWG5 2kW et 8kW sous 230VAC Ces variateurs de la gamme SG5 celduc, montes sur dissipateur, possedent une entree analogique isolee du secteur permettant de faire varier proportionnellement a cette entree, le rapport cyclique de fonctionnement d'une resistance de chauffage. La commande est synchrone au reseau et ne comporte que des periodes entieres . Principales caracteristiques : - Tension de reseau : 230V 50 ou 60Hz (400V sur demande) - Entree analogique : 0 a 10 V (4 a 20 mA, 0 a 5V ou potentiometrique sur demande) This range of controllers has an analog input isolated from the mains, provided to vary the cyclic working ratio of a load proportionally to the input.The control is synchronous with the mains and has only full periods. Mains characteristics: - Main voltage : 230V 50 or 60hz (400V on request) - Analog input : 0 to 10 V (4 to 20 mA , 0 to 5V or potentiometer on request) REFERENCE OUTPUT VOLTAGE Puissance charge/Load CONTROL REFERENCE OUTPUT VOLTAGE Puissance charge/Load CONTROL SWG50210 230VAC 2KWatts 0-10V SWG50810 230VAC 8KWatts 0-10V SG5 SG5 WF121100 L= 100mm h = 74mm p = 56mm L= 100mm h = 110mm p = 96mm Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/GRA/SW5xxxxx/A/31/03/2004 page 2 /3 F/GB Caracteristiques de commande (a 20C) / Control characteristics (at 20C) INPUT Parametre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Resistance interne / Input internal resistor fig.1 External potentiometer Symbol Uc Ic Rc Unit V mA K K VRMS VRMS V 0-10V 0,04 @10V 250 Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui Isolement sortie-semelle/Output-case isolation @500m Ui Tension assignee Isolement/Rated impulse voltage Uimp 2500 2500 4000 Caracteristiques generales / General characteristics Parametre / Parameter Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Conditions Symbol -40 / +100 -25 / +85 Typ. Unit C C Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Protection Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Puissance maximale de la charge AC-51 (230VAC 50hz)/ Max AC-51 load Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current ( @ue) Courant de charge minimum / Minimum load current Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) Symbol Ue Uemin-max Up Usync Ua P (AC-51) Itsm Vd Ilk Ie min f dv/dt di/dt I2t SWG50210 SWG50810 230 230 115-253 115-253 600 600 RC-VDR RC-VDR 12 12 8 8 Unit V rms V rms V V V kW A V mA mA Hz V/s A/s A2s 2 120 1,6 <3 5 45-66 200 50 72 8 350 1,6 <3 5 45-66 200 50 612 Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Commande /control Temps de cycle /cycle time Precision /precision Linearite /linearity 0-10V 2s +/- 20% so 100 cycle at 50 Hz -2 /+1 period 1 period celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 S/GRA/SW5xxxxx/A/31/03/2004 page 3 / 3 F/GB Caracteristiques de transfert entree/sortie / Input/output transfer characteristics commande en 0-10V: t/T = Ve x 10 (Ve en Volts - t/T en % ) T = periode t = temps de conduction exemple : Ve = 0 Volt t/T = 0% Ve = 5 Volts t/T = 50% Ve = 10 Volts t/T = 100% 0-10V control: t/T = Ve x 10 (Ve in Volts - t/T in % ) T = period t = conduction time example : Ve = 0 Volt t/T = 0% Ve = 5 Volts t/T = 50% Ve = 10 Volts t/T = 100% Load voltage t T Raccordement SWG50210 SWG50810 MAIN 50HZ L1 L2 + Control 0-10 V INPUT 0 - 10 VDC celduc France LINE 230V 50Hz SG544020 40A FULL WAVE PULSE CONTROLLER with heatsink - LOAD Load celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SWG50210
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |